Video Grabber User Manual - v. 1.19 (FW 1.29)
9. FS1 – status of the second remote file system (NFS2 / SMB2)
Shown only in case NFS or SMB protocol is used
a. Mounted – remote file system is mounted
b. Not accessible – remote file system is not mounted
10. DVI – status of the DVI (digital) signal
a. Not Locked – no DVI signal detected
b. Locked – DVI signal detected. In this case additionally detected resolution is also
shown
11. RGB – status of the RGB (analogue) signal
a. Not Locked – no VGA signal detected
b. Locked – VGA signal detected. In this case additionally detected resolution is also
shown
To Next Page
Loading...
