MULTISOFT VGR-1000 - Page 55

Video Grabber User Manual - v. 1.19 (FW 1.29)
55
LOSSLESS
OBJECTNUMBER
Name
Access
Type
Description
4
codec
IFramePeriod
read-
write
Integer
I-Frame period for H264 and
Lossless encoders – setting it to 50
makes every 50
th
frame an I-
Frame.
5
codec
PixelTolerance
read-
write
Integer
Used for analog signal filtering. If
two consecutive frames are
compared and the difference
between Red, Green and Blue
components of the pixel do not
exceed this value then such pixels
are considered identical.
Min: 0
Max: 31
6
codecLlBwLimit
Enable
read-
write
Enum
Bandwidth limiter:
0 – disabled
1 – enabled
7
codecLlBwLimit
WarnLevel
read-
write
Integer
Bandwidth limit warning level in
kilobits per second
8
codecLlBwLimit
WarnTimeToDrop
read-
write
Integer
If codecLIBwLimitWarnLevel is
exceeded more than amount of
seconds set here then frames will
be dropped to keep bandwidth
below the limit
9
codecLlBwLimit
CriticalLevel
read-
write
Integer
Bandwidth limit critical level in
kilobits per second. If exceeded
then FPS is lowered.
10
Codec
LIBistreamCompat
read-
write
Enum
Bitstream compatibility mode:
0 – specification 2.0
1 – specification 2.1