© Munters AB, 2020 25
6
Temperature Settings
•
What is the Temperature Curve
•
Configuring the Temperature Curve
•
Emergency Temperature Control
6.1
What is the Temperature Curve
As animals grow, the required air temperature changes. Trio enables setting up a temperature chart in
which you set the target temperatures for (up to) 10 days in the growth cycle. Target temperature is the
ideal temperature for pigs at that growth day. After defining the target temperatures and growth days,
Trio creates a curve in which the target temperature automatically, gradually adjusts itself. As the growth
days increase, the target temperature gradually decreases to the next setting.
For example, if on day 1 the target temperature is 95° F and on day 5 the target temperature is 86° F,
Trio adjusts the target temperature on days 2 to 4 so that it approaches the day 5 setting.
Figure 1: Temperature Curve Example
In addition the Temperature Curve has secondary functions:
•
Defines when heating begins in cases where the actual temperature drops below the target
temperature (Heat).
•
Defines when heating turns off.
•
Defines when an alarm is sent when temperatures are too low (Low Alarm)
•
Defines when an alarm is sent when temperatures are too high (High Alarm)
To Next Page
Loading...
Need help?
General
