Munters Rotem Trio User Manual

© Munters AB, 2020 55
9.4 Tunnel Ventilation
When enabled, you can:
• Set Tunnel levels in the ventilation program.
• Define tunnel set points in the ventilation program.
• Define Pressure settings for tunnel.
• Define Tunnel temperature set point in the temperature curve (refer to Configuring the
Temperature Curve, page 26).
 One tunnel door must be mapped or tunnel ventilation will not operate.
 Configuring Tunnel Ventilation requires mapping at least one fan or one tunnel door.
 Tunnel Ventilation must be enabled for the functions to appear on the screen.
• Defining the Tunnel Ventilation
• Defining the Tunnel Ventilation Settings
• Tunnel Doors
9.4.1 D
EFINING THE
T
UNNEL
V
ENTILATION
P
ARAMETERS
1. Go to System > Control Strategy > Ventilation .
2. Under Ventilation, enable Tunnel.
3. Go to Climate > Ventilation and click the Tunnel Tab.

Munters Rotem Trio Specifications

General

Brand	Munters
Model	Rotem Trio
Category	Farm Equipment
Language	English