Munters Rotem Trio User Manual

© Munters AB, 2020 75
• Alarm delay: After detecting that a parameter has gone above or below its specs, Trio waits
this amount of time before sending an alarm. This prevents sending alarms for short deviations.
Range: 0 – 999 seconds.
• Alarm Reminder: Trio will resend an alarm after this amount of time if the alarm is not
acknowledged. Range: 0 – 999 minutes.
• Water Overflow Max Water/Hour: Trio sends an alarm if the water flow exceeds this amount.
• Water Shortage:
o
Min Water/Hour: Trio will send an alarm if the water flow is less than this amount.
Range: 0 – 999 gallons/liters.
o
Enable Water Shortage Alarm: Define the period in which the alarm is active, 24 hours a
day or specific time frames.
• Potentiometer: Enable Potentiometer Alarm: Trio will send an alarm if potentiometer-controlled
inlets are not opening to the required levels. Define the period in which the alarm is active, 24
hours a day or specific time frames.
15.1.2 A
LARM
T
EST
The alarm test confirms that the alarm system is functioning properly. A test can be performed manually at
any time or scheduled weekly or daily.
• Manual Test
• Scheduled Tests
15.1.2.1 Manual Test
• Click . Stop the test as needed.
15.1.2.2 Scheduled Tests
Scheduled tests can be performed once a day only.
1. On the Alarm Screen, enable Scheduled Alarm Test.
2. Define the day(s) and time at which the test is performed.

Munters Rotem Trio Specifications

General

Brand	Munters
Model	Rotem Trio
Category	Farm Equipment
Language	English