© Munters AB, 2020 32
8
Minimum and Maximum Ventilation
The following sections detail how to configure the minimum and maximum ventilation levels by growth
day. As the temperature rises above the target temperature, Trio gradually increases ventilation level
using a combination of increased fan speeds, cycle times, opening the inlets and more.
•
Building Structure Summary
•
Defining Basic Ventilation
•
Measuring Fan
8.1
Building Structure Summary
In a typical setup, herds are housed in a building in which all rooms are connected to one central
ventilation system. Each room has an inlet which controls the amount of air entering. Centralized fans
push air in via the inlet.
Outside air is pushed into the attic; the controller maintains the required pressure in the air duct. By
adjusting the air inlet, each room independently controls the amount of air entering. As temperature rises,
the inlets’ opening increases.
To Next Page
Loading...
Need help?
General
