Section 50 00-02-0329
01-09-07 - 32 -
Setup 5 - Hourmeters
(K) This setup is for reading and/or resetting the
hourmeter. There are two separate hourmeters:
• Hourmeter 5A can be reset.
• Hourmeter 5B is the TTD internal
hourmeter and keeps track of total RUN
HOURS.
(L) 5A Hourmeter Setting. Range 0 to 65535 hrs. (This
hourmeter can be reset.)
(M) 5B Product Life Timer. Range 0 to 65535 hrs. (7.48
years non-stop. This hourmeter cannot be reset.) The
Product Life Timer reading can also be accessed
through the Modbus or via the Setup menu.
NOTE: The hourmeter registers are in the display head not in the power supply,
and are not reset by changing the power supply.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
