Section 50 00-02-0329
01-09-07 - 28 -
Setup 3 – Sensor Type
Unit must be in Shutdown Mode to edit.
Individual sensor inputs can be changed in SETUP 3 (A). As shown in the Sensor Types
table, any channel can be set to one of the 11 available configurations. SETUP 2 must be set
to “0” to make any changes in SETUP 3.
1. Press [SETUP/ENTER].
2. Use the [UP ARROW] key to increment and
change the Channel number.
3. Press [SETUP/ENTER].
4. Use the [UP ARROW] key to select the Type (B).
5. Press [SETUP/ENTER] to SAVE the changes.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
Need help?
General
