Section 50 00-02-0329
01-09-07 - 35 -
Setup 8 – Tachometer Underspeed Option
Fault Code 51. (See “Fault Code” table on page 19.)
© Use SETUP 8 to adjust the Underspeed Setting. The
range is 0 to 5000 rpm.
(D) Press [ENTER] to view the Underspeed setting.
To change the setting, use the [UP ARROW] or [DOWN
ARROW] keys to reach the new Underspeed setting and
press [ENTER] to save the change.
NOTE: Underspeed is locked out by the B1 Timer (Timer 1). Underspeed will
not cause a fault until the B1 timer expires.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
