22 Correcting paper feed
For the following cases, please conduct this adjustment.
• Using this product for the first time.
• Changing a media type.
For any other cases, please proceed to "Nozzle check and cleaning" on page 27.
A ruler is used for this adjustment. Please prepare a commercially available ruler.
Correcting paper feed
Note
When the following defects are found in printing results, they may improve by conducting a paper feed correction.
• Images are overlapping.
• There are white lines in images.
Paper feed correction steps
1. Initial adjustment
[1]
Display the Printing Preferences screen of printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 8
[2]
Click the [Adjustment] tab under the [Utility] tab.
[3]
Click [PF Print].
• The remote panel of VSM launches.
Note
VSM can be launched directly.
"Launching VSM" on page 9
To Next Page
Loading...
Need help?
General