Drawing area 75
4 Specifications of t his product
Drawing area
Specifications of this product
a
c
bd
Possible drawing area
Media feed direction
a=5 mm *1 *2
b=5 mm to 25 mm *3
c=5 mm
d=5 mm to 25 mm *3
*1 After media initial and manual feedback, and
pasting prevention process, printing starts at
15 mm.
*2 While the media initial tip and auto-cut is ON,
printing starts at 40 mm.
*3 According to the remote panel settings
To Next Page
Loading...
