54 Cleaning of cleaning wiper
[5]
Short press the operation key on the operation panel.
• The carriage moves to the maintenance position inside the front
cover.
[6]
Open the front cover.
Important!
When cleaning the cleaning wiper, please note the followings.
• Use a cleaning stick in dry condition. If moisten with water or solution, it can cause damage to the print head.
• Do not reuse a cleaning stick. Dusts can adhere causing damage to the print head.
• Standard cleaning time should be within 5 minutes. If it takes longer, the stick can dry causing damage to the print head.
[7]
Wipe the cleaning wiper with a cleaning stick.
• Wipe the left side surface of cleaning wiper going back and forth.
[8]
Wipe the right side surface of cleaning wiper going back and forth.
[9]
Wipe the right side surface of the base of cleaning wiper going back
and forth.
[10]
Close the front cover.
[11]
Short press the operation key on the operation panel.
• The carriage moves to the original position inside the front cover.
Press!
Press!
To Next Page
Loading...
Need help?
General