MX T406 - Loader Unhitching

19
Subject to modication
6. Loader unhitching
This operation must be carried out by the driver, who must exit the cab and ensure all
manoeuvres are prohibited while working on the loader.
Watch the unhitching/hitching video at www.m-x.eu
The loader must always be connected to an implement of
at least 100 kg in order to unhitch it.
— Choose a level and solid surface.
— Lower the loader in double-action mode until the front axle is
slightly raised, with the implement at on the ground.
— Then activate the notched oating position. Return to neutral.
With the lifting rams fully lled, exposure to the sun will restrict
any unwanted movement in the loader and ensure proper
hitching.
— Apply the hand brake. Stop the engine.
— Get down from the tractor.
■
— On the left side, pull the unlocking handle sharply downwards.
IMPORTANT: The locking indicator is in the red zone.
■
— Lower the left and right parking stands.
■