MX T406 - Implement Unhitching; Implement Carrier with Manual Unlocking

28
Subject to modication
8. Implement unhitching
This operation must be carried out by the driver, who must exit the cab and ensure all
manoeuvres are prohibited while working on the loader.
8.1 Implement carrier with manual unlocking
— Choose a level and solid surface.
— Position the implement horizontally, 0.30 m above the ground.
— Engage the hand brake.
— Switch o󰀨 the tractor's engine.
— Release the pressure in the hydraulic circuits to be
disconnected.
NOTE: If the loader has a solenoid valve, switch on the ignition and
press the control button.
■
— Disconnect the hydraulics.
- Mach 2: Unlock.
- Couplings: Fit protective caps onto the male and female
couplings.
— Place the hoses on the front of the implement.
■
— Unlocking the implement.
Stand to the left of the loader, NEVER IN FRONT, and pull the
lever fully towards you.
■