MX T406 - Technical Specifications

49
Subject to modication
Compliance plate.
WARNING
TO AVOID SERIOUS INJURY OR DEATH
CAUSED BY FALLING LOADS:
• Load on raised bucket or fork can fall or roll
back onto oprator causing serious injury
or death.
• Use approved clamping and/or guard
attachments for handling large, loose or
shiftable loads such as bales.
• Carry loads as low as possible.
530344
Do not exceed Rated Operating Load (ROL).
WARNING
CRUSH ZONE
• Install ram safety stop before
working under raised loader
• Lower loader to ground when
parked.
530343
crush zone.
■
24. Technical specications
4
2
1
5
3
■