25
Subject to modication
— Connect the hydraulics and the electrics. Loader with MACH
System:
- Ensure that the male and female couplings are clean before
hitching. Clean them if necessary.
- Take the housing in both hands and, with its back facing away,
lift the control valve cover onto the guide bars and engage
vertically.
■
— Connect the hydraulics and the electrics. Loader without MACH
System:
- Remove the caps
- Connect the hydraulic couplers
- Open the valve.
■
— Raise and lock the right and left parking stands.
IMPORTANT: Check that each parking stand is correctly locked.
■
— Pre-work check: apply ground force to the implement (raising the
front wheels of the tractor) to check the loader is correctly
hitched.
■
To Next Page
Loading...
