EN
W415-1838 / B / 06.01.20
15
installation
2.7 rubber feet installation
A. Place the appliance face down on a soft surface.
B. Using a screw driver, remove the screws on the bottom of the appliance.
C. Install the 4 rubber feet (6 rubber feet for NEFL60FH-MT-EU) onto the bottom of the appliance using the
screws previously removed in Step B. See illustrations below.
NEFL42/50FH-MT-EU Illustrated
NEFL60FH-MT-EU Illustrated
The screws for installing the rubber feet are secured to the appliance. Removal of the screws is necessary for
installing the rubber feet.
note: