NARDA PMM 9010F - Page 6

VI Safety considerations
11 PMM 9030/9060/9180 EMI CISPR Receiver extension
30 MHz – 3GHz / 6GHz / 18GHz (Option)
11.1 Introduction to PMM 9030/9060/9180……………………………………
11.2 Instruments items………..…………………………………………………
11.3 Optional PMM accessories………..………………………………………
11.4 Other accessories…………………..………………………………………
11.5 PMM 9030 Main specifications.…………………………………………..
11.6 PMM 9030 Front and rear panel…………………………………………
11.7 PMM 9060 Main specifications.…………………………………………..
11.8 PMM 9060 Front and rear panel…………………………………………
11.9 PMM 9180 Main specifications.…………………………………………..
11.10 PMM 9180 Front and rear panel………………………………………..
11.11 Functional description……………………………………………………
11.12 No coaxial cable between the antenna and the receiver…………….
11.13 Emission measurements………………………………………………..
11.14 Installation…………………………………………………………………
11.14.1 Introduction……………………………………………………………..
11.14.2 Initial inspection………………………………………………………..
11.14.2.1 Packing and Unpacking…………………………………………….
11.14.3 Preparation for use…………………………………………………….
11.14.4 Battery charger…………………………………………….…………..
11.14.4.1 To replace the mains connector of the battery charger…………
11.14.4.2 To charge the internal battery…….………………………………..
11.14.4.3 To Supply 9030/9060/9180 through the mains power socket by
SPA-01........................................................................................................
11.14.4.4 Indication of the battery status on the screen and with PW led…
11.14.5 Environment……………………………………………………………..
11.14.6 Return for Service…………………………………………….…………
11.14.7 Equipment cleaning……………………………………….……………
11.14.8 Equipment ventilation……………………………………..……………
11.14.9 Hardware installation…………………………………………………...
11.14.10 PMM 9010+ PMM 9030/9060/9180 initial screen…………………
11.14.11 Led on the PMM 9010 and on the PMM 9030/9060/9180..………
11.14.12 PMM 9010 + PMM 9030/9060/9180 main screen…………………
11.14.13 PMM 9010 + PMM 9030/9060/9180 Setup panel………………….
11.14.14 PMM 9010 + PMM 9030/9060/9180 Link failure…………………..
11.14.15 Antenna Mounting Kit AMK-01 and AMK-02………..…………......
Antenna Mounting Kit AMK-01 with BL-01, LP-02, LP-04, AS-02, AS-03, AS-
04, AS-05 and AS-06..................................................................……….
Antenna Mounting Kit AMK-01 with LP-03……………………………………..
Antenna Mounting Kit AMK-02 with BL-01, AS-07 and AS-08,,,…………….
11.15 Analyzer Mode operating instructions……………………………….....
11.15.1 Introduction………………………………………………………………
11.15.2 Frequency…………………………………………………..……………
11.15.3 RBW……………………………………………………………………...
11.15.4 Level……………………………………………………………………...
11.15.4.1 Input: Attenuators and preamplifier…………………………………
11.15.4.2 Misc……………………………………………………….……………
11.15.4.3 Detector…………………………………………………...…………..
11.15.4.4 Conversion factor………………………………………..…………...
11.15.5 Marker……………………………………………………….……………
11.15.6 ESC…………………………………………………………….…………
Page
11-1
11-2
11-2
11-2
11-3
11-5
11-6
11-8
11-9
11-11
11-12
11-12
11-13
11-14
11-14
11-14
11-14
11-14
11-14
11-14
11-14
11-14
11-15
11-16
11-16
11-16
11-16
11-17
11-18
11-18
11-18
11-19
11-20
11-21
11-21
11-25
11-27
11-37
11-37
11-38
11-38
11-39
11-39
11-40
11-40
11-41
11-41
11-41