Nasuni Edge Appliance Initial Configuration Guide 8.3 91
Overview
2. Press Enter to access the Service menu. The login prompt appears. Enter the username and
password. The login username is service, and the default password is service. The Service
Menu appears.
Figure A-2: Service Menu.
Note: For security, use the changepassword command to change the password for the
service console.
3. To see a list of available commands, enter help at the prompt. To see details about each
command, enter help <command>.
Figure A-3: List of available commands.
4. To access commands to change the network configuration, enter editnetwork at the prompt.
The network prompt appears.
Figure A-4: Network prompt.
5. To see a list of available editnetwork commands, enter help at the prompt. To see details about
each editnetwork command, enter help <command>.
Figure A-5: List of available editnetwork commands.
6. To exit the editnetwork commands, enter close.
To Next Page
Loading...