Nasuni Edge Appliance Initial Configuration Guide 8.3 78
Accessing Volumes Nasuni Mobile Access
File Access
Opening a file with a specific app
To select an app to open a file with, tap the drop-down icon beside its name, then tap “Open with”.
A list of apps appears that can open the file on the device.
Figure 2-33: Apps that can open file on device.
Tip: For iOS, tap the share icon at the top right.
Select an app from the list. To always open similar files with the selected app, click Always. Otherwise,
click “Just once”. The file opens in the selected app.
Accessing files directly from apps
On Android platforms, apps can directly open files on the Nasuni Edge Appliance. You must first log in
to the Nasuni Mobile Access application.
To open a file on the Nasuni Edge Appliance from within the app, perform the usual File Open
procedure for that app. Select Browse. A list of file sources appears.
Figure 2-34: Sources for files on device.
Select Nasuni from the list. The Nasuni app displays available files on the Nasuni Edge Appliance.
Navigate to the file you want.
Caution: The length of a path, including the file name, must be less than 4,000 bytes. Since
the Unicode representation of a character can occupy several bytes, the maximum
number of characters that a file path might contain can vary.
When done with the file in the app, perform the usual File Save procedure. The file is saved to the
Nasuni Edge Appliance.
On both iOS and Android platforms, apps can directly save files on the Nasuni Edge Appliance. You
must first log in to the Nasuni Mobile Access application.
To Next Page
Loading...