© National Instruments | 1-5
PXIe-1095 User Manual
Optional Equipment
Contact National Instruments to order the following options for the PXIe-1095 chassis.
Timing and Synchronization
An optional timing and synchronization accessory available from National Instruments provides
trigger routing capability, higher accuracy CLK10/CLK100, connectors for 10 MHz reference
clock input and output, and remote chassis monitoring and inhibit control.
EMC Filler Panels
EMC filler panel kits are available from National Instruments.
Slot Blockers
PXI Slot Blocker kits are available from National Instruments for improved thermal
performance when all slots are not used.
Replacement Power Supply
Replacement power supply kits are available from National Instruments. You easily can install
replacement power supplies without powering off the system.
Replacement Fan Kit
A fan kit is available from National Instruments, includes both side and PXI module fan assemblies.
Rack Mount Kits
Rack mounting kits are available from National Instruments that can accommodate a variety of
rack depths.
PXIe-1095 Backplane Overview
This section provides an overview of the backplane features for the PXIe-1095 chassis.
Interoperability with CompactPCI
The design of the PXIe-1095 chassis provides you the flexibility to use the following devices in
a single PXI Express chassis:
• PXI Express compatible products
• CompactPCI Express compatible 2-Link system controller products
• CompactPCI Express compatible Type-2 peripheral products
• PXI peripheral products modified to fit in a hybrid slot
• Standard CompactPCI peripheral products modified to fit in a hybrid slot
To Next Page
Loading...
Need help?
General
