National Instruments PXI EXPRESS PXIe-1095 User Manual

© National Instruments | A-1
A
Pinouts
This appendix describes the connector pinouts for the PXIe-1095 chassis backplane.
Table A-1 shows the XP1 Connector Pinout for the System Controller slot.
Table A-2 shows the XP2 Connector Pinout for the System Controller slot.
Table A-3 shows the XP3 Connector Pinout for the System Controller slot.
Table A-4 shows the XP4 Connector Pinout for the System Controller slot.
Table A-5 shows the TP1 Connector Pinout for the System Controller slot.
Table A-6 shows the TP2 Connector Pinout for the System Timing slot.
Table A-7 shows the XP3 Connector Pinout for the System Timing slot.
Table A-8 shows the XP4 Connector Pinout for the System Timing slot.
Table A-9 shows the P1 Connector Pinout for the Hybrid peripheral slots.
Table A-10 shows the XP3 Connector Pinout for the Hybrid peripheral slots.
Table A-11 shows the XP4 Connector Pinout for the Hybrid peripheral slots.
For more detailed information, refer to the PXI-5 PXI Express Hardware Specification,
Revision 2.0. Contact the PXI Systems Alliance for a copy of the specification.

National Instruments PXI EXPRESS PXIe-1095 Specifications

General

Brand	National Instruments
Model	PXI EXPRESS PXIe-1095
Category	Chassis
Language	English