National Instruments PXI EXPRESS PXIe-1095 - Page 60

© National Instruments | I-1
Index
A
AC power cables (table), 1-2
B
backplane
hybrid peripheral slots, 1-7
interoperability with CompactPCI, 1-5
overview, 1-5
PXI local bus, routing, 1-9
system controller slot, 1-6
system reference clock, 1-10
system timing slot, 1-8
trigger bus, 1-9
C
cables, power (table), 1-2
chassis ambient temperature definitions, 2-5
chassis cooling considerations
ambient temperature definitions, 2-5
clearances, 2-2
chassis initialization file, 2-17
clearances for chassis cooling, 2-2
CompactPCI
interoperability with PXIe-1095
backplane, 1-5
configuration. See installation, configuration,
and operation
cooling
filler panel installation, 2-5
slot blocker installation, 2-5
E
EMC filler panel kit, 1-5
F
fan module, replacing, 1-5
filler panel installation, 2-5
G
ground, connecting, 2-6
H
hybrid peripheral slots, description, 1-7
hybrid slot pinouts
P1 connector (table), A-7
XP3 connector (table), A-9
XP4 connector (table), A-9
I
IEC 320 inlet, 2-7
installation, configuration, and operation
chassis initialization file, 2-17
connecting safety ground, 2-6
filler panel installation, 2-5
installing a PXI Express system
controller, 2-7
peripheral module installation, 2-9
PXI Express configuration in MAX,
2-13
rack mounting, 2-5
site considerations, 2-2
slot blocker installation, 2-5
testing power up, 2-7
unpacking the PXIe-1095, 1-1
interoperability with CompactPCI, 1-5
K
key features, 1-2
kit contents, 1-1
L
LED indicators, 2-10
front panel LED states (table), 2-10,
2-11, 2-12