The Velocity module.
• To Volume: Adjusts how input velocity will affect the volume of triggered cells. When set to 0 %,
velocity will not affect the volume of the triggered cell, for instance., no matter how hard you hit
the key or pad, the output volume will always be 100% of the cell's volume setting. Turning the
knob all the way to the right will translate the input velocity to a percentage of the cell’s volume
level (with an underlying minimum value of -inf dB).
• To Pitch: Adjusts how input velocity will affect the pitch of triggered cells. When set to 0 st.,
velocity will not affect the pitch of the triggered cell, for instance, no matter how hard you hit
the key or pad, the cell will always play at its original pitch. Turning the knob to the right will
translate the input velocity to semitones (with an underlying minimum value of 0 st., and a
maximum value of +12 st.)
10.4. Engine
The engine module allows you to select between two basic sampler engine modes: Sampler mode
and Stretch mode. The former has an additional submode that emulates the sound of two
legendary hardware samplers. An additional mode, Beat mode, is available for samples containing
timing information, such as REX les, ACID wav les, and Apple Loop les.
The Engine module contains the following parameters and controls:
The Engine module.
MAIN PAGE 28
To Next Page
Need help?
General
