13. Setup Page
The Setup page provides tools specically designed for drum playing and programming. You can
use them to ne-tune cells/Kits or create totally new sounds out of the existing library content. All
effects/parameters are cell-based, which means that each cell can have totally different settings.
• To open the Setup page, click on the Setup tab at the bottom of the application.
The Setup page in the Edit area.
13.1. MIDI Input
The MIDI Input module lets you customize the MIDI channel and velocity response of cells and
change their trigger behavior.
The MIDI Input module contains the following settings and options:
The MIDI Input module.
• Curve: Adjusts the velocity curve for a cell using handles.
• MIDI channel: Species whether a cell should receive data from all MIDI channels or only a
specic MIDI channel with this menu.
• Key Track: Sets key range tracking. When activated (lit) and the key range exceeds one note
(refer to "Key Range control" in Quick Access Area), all samples in the current cell will change
pitch in response to the MIDI input. For example, if the key range is C1-D1 and you play D1 with
Key Track on, the pitch will be two semitones higher than if you had played C1. When
deactivated, the cell's pitch will be determined solely by its root key and the Tune knob (refer to
Quick Access Area).
• Note Latch: Activates "latch" for incoming notes. For instance, you can play a note to trigger
the sample, play the note again to stop it.
SETUP PAGE 45
To Next Page
Loading...
Need help?
General
