2. Select Render Cell in Place.
The newly rendered sample is loaded in the cell. The effects are deactivated automatically.
11.2. Using Effect Presets
Each effect on the Effects page comes with a set of presets that you can access using the Preset
menu. It is located next to the module name (arrow icon). The Preset menu contains two
submenus for Factory and User content.
To save the current effect settings as a User preset:
1. Click the arrow icon next to the module name to open the Preset menu.
2. Select Save Preset….
3. Enter a Preset Name for your new User preset .
4. Click Save.
A new User preset containing your settings is saved to the hard drive. The preset will appear in
the User submenu of the module's Preset menu.
To load a preset from the Preset menu:
1. Click the arrow icon next to the module name to open the Preset menu.
EFFECTS PAGE 33
To Next Page
Loading...
Need help?
General
