• Module On/Off: Activates or deactivates the module.
• Preset menu (arrow button): Opens the Preset menu that enables you to load factory presets
or save and recall your own user presets.
• Bits: Adjusts the amount of available quantization values by setting the bit depth. Each sample
of the signal is quantized to the available values. A lesser amount of values results in a more
distorted sound.
• Hertz: Adjusts the sampling frequency at which the input signal is resampled.
• Noise: Adjusts the amount of noise added to the signal.
• Color: Adjusts the sound character of the noise signal by applying a low-pass lter.
• Output: Adjusts the output level of the module.
11.5. Filter / EQ
The Filter / EQ module shapes the frequency content of signals, not unlike equalizers. You can use
it to polish and clean up sounds, or add color and resonances. The lter modes offer a selection of
different lter types, each with their own unique character.
This module contains the following parameters and controls:
• Module On/Off: Activates or deactivates the module.
• Preset menu (arrow button): Opens the Preset menu that enables you to load factory presets
or save and recall your own user presets.
• Mode selector: Selects one of seven lter modes that determine the basic character of the
lter, Solid G EQ, 3-band EQ, Lowpass, Highpass, Bandpass, Peak/Notch, Effect. The following
sections describe each of the modes in detail.
• Type selector: Selects different lter types in Lowpass, Highpass, Bandpass, Peak/Notch,
Effect mode, and the frequency band in Solid G-EQ and 3-band EQ mode.
EFFECTS PAGE 35
To Next Page
Loading...
Need help?
General
