▪ Inside an active Loop, while holding the LOOP IN or LOOP OUT button depressed, use the
jog wheel to adjust the Loop In Point or Loop Out Point, respectively. See section ↑7.3.2,
Tempo Reset for more info on loops.
▪ Your jog wheel can also be switched to a special Jog mode providing you with advanced
features like FX control or filter control. Please refer to section ↑8.2.1, S2 Control Options
for more info.
7.3 Using the Tempo Unit
The TEMPO fader provides you with extended control over the Deck tempo.
7.3.1 Tempo Fader
The tempo fader and Tempo Reset button.
The
tempo
fader controls the tempo of the focused Deck: Pulling the tempo fader downward/
upward increases/decreases the tempo, respectively. By default, the range of the tempo fader
is ±8 %.
You can change the tempo fader's range in Preferences >
Transport > Tempo. Both the
tempo fader in the software Deck and the tempo fader on your S2 are affected by this set-
ting.
Hardware Control Reference
Using the Tempo Unit
Traktor Kontrol S2 - Manual - 106