Native Instruments TRAKTOR KONTROL S2 User Manual

4.6.3 Assigning Decks to the FX Unit and Bringing In the FX
Now
we
need to assign this FX Unit to a Deck. To do this, we use the FX Assign buttons at the
top of each channel on the Mixer (below the GAIN/FILTER encoder):
The FX Assign buttons on each channel.
Let’s assign the FX Unit 1 to Deck B:
1. Press
the
left FX Assign button (labeled “1”) on channel B to assign Deck B to the FX
Unit 1.
2. Slowly turn the DRY/WET knob clockwise to bring in the FX.
→
You now hear the track on Deck B being processed by the FX Unit 1.
You can also assign another channel to the same FX Unit. For example, if you also want to
apply these
FX to the samples loaded on Deck C or D, simply press the FX Assign button
“1” on the corresponding channel(s) in the software.
4.6.4 Controlling the FX Unit
You can control each FX in this FX Unit by turning the respective FX Knob 1-3:
The FX Knobs 1-3.
►
Play around with the FX Knobs 1-3 and listen to the result on the audio. You can also
activate/deactivate each FX individually by pressing the corresponding FX Buttons 1-3 be-
low.
Changing the FX in a Slot
You can load another FX in each slot. Let’s switch the first FX slot to the Gater:
Tutorials
Adding FX
Traktor Kontrol S2 - Manual - 56

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English