The Alert indicator basically informs you that something might go wrong with your TRAK-
TOR KONTROL S2 system: the indicator flashes if the Main Volume knob or the Headphones
Volume knob is too low in TRAKTOR, if the CPU meter is too high, or if the power supply of
your laptop is disconnected.
USB Indicator
The USB indicator.
The USB indicator
gives you information about the status of the USB connection between your
S2 and your computer. The indicator should be continuously lit. If it flashes, there is no con-
nection to the computer or a problem with the driver.
►
Check that the USB indicator is continuously lit before going any further with your S2.
Microphone Indicator
The Microphone indicator.
The Microphone indicator
is lit when the separate microphone channel is active. Press the MIC
ENGAGE button on the controller’s front side to activate/deactivate the microphone channel.
For more info on the MIC section, see chapter ↑6.2.1, MIC Section.
Hardware Control Reference
Using the Mixer
Traktor Kontrol S2 - Manual - 125
To Next Page
Loading...
