►
At the bottom of your S2, verify that the crossfader is moved all the way to the left:
►
Above, the channel fader of channel A should be raised to its highest:
►
The Level meter of Channel A should show some activity. If not, check that the HI, MID,
LOW on the left channel are set to center position; and at the top of the channel, push
the GAIN/FILTER encoder once to reset the channel’s input gain to 0 dB.
►
At the top center of the Mixer, the MAIN LEVEL knob should be turned at least part of
the way to the right:
Tutorials
Playing Your First Track
Traktor Kontrol S2 - Manual - 29
To Next Page
Loading...
