Native Instruments TRAKTOR KONTROL S2 User Manual

The left jog wheel on your S2 controller.
1. On the
left Deck, press and spin the jog wheel’s top plate to seek through the track. (You
can also fast seek through the track by holding the SHIFT button at the bottom of the
Deck while spinning the jog wheel.)
2. Once you have found an interesting point for cueing (let’s say a downbeat), keep pressing
the top plate and release it when a downbeat arrives in the other track.
Deck A starts playing from that point.
Note that you could also stop playback (by pressing the PLAY button) before you seek an inter-
esting point with the jog wheel. Once you have found the point, you can then release the jog
wheel — since the Deck is not playing, the playhead will stay put at that position. When a
downbeat arrives in the other track, press PLAY again on the left Deck.
Aligning the Beats
In case you still hear a slight offset between both tracks, you can use the outer rim of the jog
wheel to adjust the track’s phase and cancel the offset:
►
On the left Deck, move the jog wheel’s outer rim in the desired direction to temporarily
bend the tempo and adjust the phase in order to cancel any minor offset.
→
Your tracks now perfectly match.
Tutorials
Mixing In a Second Track
Traktor Kontrol S2 - Manual - 37

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English