Native Instruments TRAKTOR KONTROL S2

3. Press the Loop MOVE encoder to engage TRAKTOR DJ's Loop Slicer mode.
You will notice that TRAKTOR DJ now displays the selected loop size into slices. The 4
Hotcue buttons on the S2 will now be backlit green indicating that they can now be trig-
gered individually whilst the Loop Slicer is engaged.
4. Experiment by triggering the Hotcue buttons whilst in Loop Slicer mode.
Using the S2 with TRAKTOR DJ
Using the Transport Section
Traktor Kontrol S2 - Manual - 79