NavigateWorx NR500 Series - Page 41

Industrial Cellular VPN Router NR500 Series User Manual
Page 40 / 78
Wi-Fi AP
Wi-Fi AP settings page as below.
Wi-Fi->Wi-Fi AP
• Enable
Check this box will enable the Wireless interface.
• SSID
The SSID is the name of the wireless local network. Devices connecting to the Nr500 router WiFi
access will identify the Access Point by this SSID.
• Enable Broadcast SSID
When the checkbox is not checked, SSID broadcast is disabled, other wireless devices can't not find
the SSID, and users have to enter the SSID manually to access to the wireless network.
• Security Mode
Select security mode from “None” or “WPA PSK”.
• WPA Type
Select WPA Type from “Auto”,“WPA” and “WPA2”.
• Encryption Type
Select the encryption method. Options are “Auto”, “TKIP”, or “CCMP”. Because these options
depend on the authentication method selected, some options will not be available.
• Password
Enter the pre-shared key of WPA encryption.