NavigateWorx NR500 Series User Manual

Industrial Cellular VPN Router NR500 Series User Manual
Page 28 / 78
4.3 Link Management
This section shows you the setup of link management.
4.3.1 Connection Manager
Click to add a new priority interface.
Click to edit current interface settings.
Click to delete current interface.
Connection Manager->Status
• Type
Displays the connection interface
• Status
Displays the connection status of this interface.
• IP Address
Displays the IP Address of this interface.
• Netmask
Displays the subnet mask of this interface.
• Gateway
Displays the gateway of this interface. This is used for routing packets to remote networks.

NavigateWorx NR500 Series Specifications

General

Brand	NavigateWorx
Model	NR500 Series
Category	Network Router
Language	English