Industrial Cellular VPN Router NR500 Series User Manual
Page 53 / 78
Displays the gateway of this interface. This is used for routing packets to remote networks.
• Interface
Displays the outbound interface of this route.
Route->Static Route Settings
• Description
Enter the description of current static route rule.
• IP Address
Enter the IP address of the destination network.
• Netmask
Enter the subnet mask of the destination network.
• Gateway
Enter the IP address of the local gateway.
• Interface
Please refer to the Network->Route->Status interface.
4.5.3 VRRP
The Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol that provides
automatic assignment of available Internet Protocol (IP) routers for participating hosts. The VRRP
router who has the highest number will become the virtual master router. The VRRP router number
ranges from 1 to 255 and usually we use 255 for the highest priority and 100 for backup. If the
current virtual master router receives an announcement from a group member (Router ID) with a
higher priority, then the latter will pre-empt and become the virtual master router.
To Next Page
Loading...
Need help?
General