NavigateWorx NR500 Series - Network Settings - VRRP Protocol

Industrial Cellular VPN Router NR500 Series User Manual
Page 54 / 78
Network->VRRP
• Enable
Check this box will enable VRRP.
• Interface
Select the interface of Virtual Router.
• Virtual Router ID
User-defined Virtual Router ID. Range: 1-255.
• Authentication Type
Select the authentication type for VRRP.
• Priority
Enter the VRRP priority range is 1-254 (a bigger number indicates a higher priority).
• Interval
Heartbeat package transmission time interval between routers in the virtual IP group. Range: 1-255.
• Virtual IP Address
Enter the virtual IP address of virtual gateway.