Industrial Cellular VPN Router NR500 Series User Manual
Page 77 / 78
Appendix D - CLI
Command-line interface (CLI) is a software interface that provide another configurable way to
set parameters on our router. We could use Telnet or SSH connect to our router for CLI input.
NR500 CLI Access
navigateworx.router login: admin
Password: admin
>
CLI reference commands
>?
config Change to the configuration mode
exit Exit this CLI session
help Display an overview of the CLI syntax
ping Ping
reboot Reboot system
show Show running configuration or running status
telnet Telnet Client
traceroute TraceRoute
upgrade Upgrade firmware
version Show firmware version
e.g.
> version
1.0.0 (1017.4)
> show wifi
wifi
{
"status":"Ready",
"mac":"a8:3f:a1:e0:ab:81",
"ssid":"NR500-WAN",
"channel":"6",
"width":"40 MHz",
"txpower":"20.00 dBm"
}
> ping www.baidu.com
PING www.baidu.com (14.215.177.38): 56 data bytes
64 bytes from 14.215.177.38: seq=0 ttl=54 time=10.826 ms
To Next Page
Loading...
Need help?
General