NavigateWorx NR500 Series - System

Industrial Cellular VPN Router NR500 Series User Manual
Page 67 / 78
4.8.2 System
This section allows you to review the device system settings.
System->General
• Hostname
User-defined router name, which might be use for IPSec local ID identify.
• User LED Type
Defined the User LED behavior.
• Time Zone
Select the zone where the device is in use.
• Customized Time Zone
Customized the zone where the device is in use.
• Enable (NTP Client)
Selected Enabled to utilize the NTP client to synchronize the device clock over the network using a
time server (NTP server).
• Primary NTP Server
Enter the IP address (or host name) of the primary time server.
• Secondary NTP Server
Enter the IP address (or host name) of the secondary time server.