NavigateWorx NR500 Series - Wi-Fi Configuration

To Next Page

To Previous Page

Industrial Cellular VPN Router NR500 Series User Manual

Page 39 / 78

4.3.4 Wi-Fi

NR500 router could only be set to function as either a Wi-Fi Client or a Wi-Fi Access Point, but not

both simultaneously. Select Wi-Fi (Access Point) from the main navigation menu to Wi-Fi (default

as Access Point) page, which contains tabs for configuration of the Wi-Fi Access Point interface.

You could review the Wi-Fi connection status as below.

Wi-Fi->Basic

• Running Mode

Select the configurate Wi-Fi mode from AP or Client.

• Country Code

Enter the country where the AP is located.