Industrial Cellular VPN Router NR500 Series User Manual
Page 6 / 78
Easy to use and easy maintenance
• User-friendly web interface for human interaction
• Easy configuration for deployment
• Support 3rd Party remote management cloud
1.3 General Specifications
Cellular Interface
• Standards: FDD-LTE/TDD-LTE, WCDMA/UMTS/HSPA/HSPA+/EDGE/GPRS,
• 2× SMA female antenna connector
• 2 x SIM (3.0V & 1.8V)
Wi-Fi Interface (Optional)
• Standards: 802.11b/g/n, 300Mbps
• 2 x RP-SMA male antenna connector
• Support Wi-Fi AP and Client modes
• Security: WEP, WPA and WPA2 encryption
• Encryption: AES, TKIP, WEP64
Ethernet Interface
• Standard: IEEE 802.3, IEEE 802.3u
• Number of Ports:
NR500-Standard: 2 x 10/100 Mbps, RJ45 connector
NR500-Pro: 4 x 10/100 Mbps, RJ45 connector
• 1 x WAN interface (configurable on Web GUI)
• 1.5KV magnetic isolation protection
Serial Interface
• 1×RS232 (3 PIN): TX, RX, GND
• 1 x RS485 (2 PIN): Data+(A), Data-(B)
• Baud rate: 300 bps to 115200 bps
• Connector: terminal block
• 15KV ESD protection
To Next Page
Loading...