NavigateWorx NR500 Series User Manual

Industrial Cellular VPN Router NR500 Series User Manual
Page 46 / 78
Serial->Connection Settings
• Baud Rate
Select the serial port baud rate. Supported values are 2400, 4800, 9600, 19200, 38400, 57600, or
115200.
• Data Bits
Select the values from 5, 6, 7 or 8.
• Stop Bits
Select the values from 1 or 2.
• Parity
Select values from none, even, odd.
• Transmission Method
Select the transmission method for serial port.
• MTU
Maximum Transmission Unit, maximum packet size allowed to be transmitted. Should be left as
default value of 1024 in most cases.
• Protocol
Select the mode for Serial IP communication. Supported modes are UDP, TCP Server, or TCP Client.
• Remote IP Address
Enter the IP address of the remote server.
• Remote Port
Enter the port number of the remote server.
Below window displays different settings when you select TCP Server on Protocol.
Serial->Connection Settings
• Local IP Address
Enter the IP Address of the local endpoint.
• Local Port
The port number assigned to the serial IP port on which communications will take place.

NavigateWorx NR500 Series Specifications

General

Brand	NavigateWorx
Model	NR500 Series
Category	Network Router
Language	English