NavigateWorx NR500 Series - Page 52

Industrial Cellular VPN Router NR500 Series User Manual
Page 51 / 78
Firewall->ACL
• Description
Add a description for this rule.
• Protocol
Any: Any protocol number.
TCP: The TCP protocol.
UDP: The UDP protocol.
TCP & DUP: both TCP and UDP protocol
ICMP: The ICMP protocol.
• Source Address
A specific host IP address can also be specified, or a range of IP addresses via a bitmask (the box
following the /).
• Destination Address
A specific IP address can also be specified, or a range of IP addresses via a bitmask (the box
following the /).
Firewall->Port Mapping
• Description
Add a description for this rule.
• Protocol
Any: Any protocol number.
TCP: The TCP protocol.
UDP: The UDP protocol.
• Remote Address
Enter a WAN IP address that is allowed to access the unit.
• Remote Port
Enter the external port number range for incoming requests.
• Local Address
Sets the LAN address of a device connected to one of the Fusion’s LAN interfaces. Inbound requests
will be forwarded to this IP address.