NavigateWorx NR500 Series User Manual

Industrial Cellular VPN Router NR500 Series User Manual
Page 69 / 78
Syslog displays system logs that are stored in the log buffers.
System->Syslog
• Log Location
Select the log store location from “RAM” or “Flash”.
• Log Level
Select the log output level from “Debug”, “Notice”, “Info”, “Warning” or “Error”.
• Enable Remote Syslog
Check this box to enable remote syslog connection.
• Remote Syslog Server
Enter the IP address of remote syslog server.
• Remote Syslog Port
Enter the port for remote syslog server listening.
System->Web Server
• HTTP Port
Enter the port for Hypertext Transfer Protocol. A well-known port for HTTP is port 80.
• HTTPS Port
Enter the port for HTTPS Protocol. A well-known port for HTTPS is port 443.
• Private Key
Import private Key file for HTTPS connection.
• Certificate File
Import certificate file for HTTPS connection.

NavigateWorx NR500 Series Specifications

General

Brand	NavigateWorx
Model	NR500 Series
Category	Network Router
Language	English