Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
64
d. When the load is complete, select Close.
2. Insert the CX3 USBFlash Drive into the USB Port.
3. Press F8 during startup to bring up the Boot Menu.
4. Select the USB device to boot the CX3 BIOS flash key. An option menu will
load.
5. Select option 1 to update BIOS with DMI preserved.
Note
After the update has completed and the terminal is rebooted, the terminal
may reboot additional times as it powers up. This is normal and expected
behavior due to the nature of the features of the BIOS/SPI.
To Next Page
Loading...
