NCR P1235 - Page 14

NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 14 of 37 12/6/16
Step Step Description Pictures
5
Remove the knock
-
out piece to allow room
for the cable.
6
EPSON TML
-
90P
USB/Parallel
printer
Installation (Optional)
• Connect EPSON TML-90P Power cable to
power port at the bottom of the printer
• E*SmartClock does not support the
parallel printer port. The printer must be
connected with USB.
• Connect type B USB data cable at the
bottom of the printer
Note: Power for EPSON TML-90P printer will
be supplied using power brick as NCR P1235
does not support a Powered USB printer.
7
A
ttach the plastic cover
back
to the bottom
of the Printer