NCR P1235 - e*SmartClock Application Start Up; 7.6 Application Start Up; Application Initialization and Time Sync; e*SmartClock Launch and Verification

NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 22 of 37 12/6/16
7.6 Application Start Up
After the device is successfully staged, the e*SmartClock application will automatically launch. The Installer should
follow the steps below.
Step Step Description Pictures
1
Application Initialization
• Initialization may take 2-4 minutes.
• During this step, informative message will
be displayed.
2
Time Sync
During application startup, a Time Sync may
be performed with a 45-second count down.
Just wait and the e*SmartClock will restart
with the correct time and time zone.
Device will reboot.
3
e*
SmartClock Application Launched
Notes:
• Names may be displayed. Those names
displayed are crew members that are
coming on shift.
• If “The clock does not have any
employee data” appears in a red at the
top of the screen and does not go away
within a minute or so, please inform the
Store Manager that Employee data is
not loaded.