NCR P1235 - Page 25

NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 25 of 37 12/6/16
Step Step Description Pictures
4
VGA Cable (Male) port should attach to
VGA port on second monitor as shown
in the picture
5
Reboot
e*SmartClock device
6
Verify e*SmartClock display on
NCR
P1235 is duplicated on additional
monitor.
Note: if display is failed on duplicated
monitor, verify if additional monitor is
powered on and refer Appendix C –
Additional Monitor Configuration
Instruction (Optional) 38T to duplicate
monitor manually.
7
Additional Monitor Installation
process ends here