Service Level Troubleshooting 3-39
Printer Configuration (Level 1)
Level 1 diagnostics (setup mode) provides the functionality to change the settings for
various printer functions.
Take note of the following information when changing the settings:
• The default options are set at the factory and are stored in the history non–volatile
memory.
• After the settings are changed and stored in the non–volatile memory, the diagnostic
setup is exited, which saves the settings.
Caution: If you are changing the printer settings, make sure to add the correct settings
for that particular function or test to avoid accidentally changing the settings for
another function or test. If the settings are accidentally changed, re–enter the setup
mode, and then re–enter the correct settings. If you need assistance, contact a service
representative. For more information, refer to Contacting a Service Representative on
page35.
To Next Page
Loading...
