Arabic Font Support F-147
Proportional Font Conversion Handling of Arabic
Limitations
Due to the features of Arabic font, there are several limitations in terms of the character
attributes. For more information on the command description, refer to the NCR RealPOS
7199 Thermal Receipt Station Printer Programmer's Guide (BCC5-0000-5170). Please see the
command description of Print Characteristic Commands in detail.
Invalid command list
The following table contains a list of commands that are not available if a new Arabic
character is used.
Command Command name Remarks
ESC DC2 Select 90 Degree Counter-Clockwise Rotated
Print
ESC SYSN Select Pitch (Column Width)
ESC SP Set Character Right-Side Spacing
ESC ! Select Print Modes Bit0, Bit3
Invalid
ESC % Select or Cancel User-Defined Character Set
ESC & 3 Define User-Defined Characters
ESC : Copy Character Set from ROM to RAM
To Next Page
Loading...
